Category Archives: 3D Printing

Learn AutoCAD 2D in 2 Days

AutoCAD 2D for Adults –Beginners’ Course (Start from Zero)

Benefits for Working Adults – Why this course?

  • Your company needs you to be proficient, or at least have a simple working knowledge of AutoCAD or any other CAD software
  • Creating product designs
  • For Plan Reading
  • Editing other people’s drawings
  • Office layout, plans
  • Creating designs of products or buildings
  • You not having the knowledge of AutoCAD slows down your work a lot ( you need to depend on others to do simple edits, or corrections, or designs)

Course outline:

An Introduction to Mechanical Engineering, Civil Engineering, Interior Design, Architecture, Product Design, Furniture Design and Computer Animation.

  • AutoCAD OverviewCAD 2D Drawing
  • Menus, Toolbars and Command Line
  • General Terminology
  • Drawing Editor
  • 2D Drawing Commands
  • Drawing Setup
  • Basic Operating System
  • Basic Selection Sets
  • Editing Commands
  • Display Commands
  • Object Snap and Drawing Tools
  • Setting Commands
  • Coordinate Systems
  • Inquiry Commands
  • Basic Plotting/Printing
  • Basic Blocks/Symbols
  • Layer, Color and Linetypes
  • Layer Previous
  • Basic Dimensioning
  • Crosshatching
  • Text Commands/Multitext

http://www.caddesignschool.com/learn-autocad-2d

What our students say about us :

“I have always thought learning AutoCAD will be difficult, and it will take a long time to master it. So I never got started. But I was wrong. Cad Design Centre made the learning of AutoCAD very easy to understand for me, even at my age” Ramli Baharudin, ASJ Consulting Sdn Bhd

“My office had Microsoft project, and very few of our employees knew how to use it. As I frequently depended on others to plan and enter the data for the project, I decided to learn it myself. In 2 days, Cad Design Centre thought the simple way to manage projects with Microsoft Project, and I am very happy with my new learning. I could quickly use what I learnt, in my office” – Mr C.H. Yap

View what our students say:

Ahmad Hairi (Oil & Gas Consultant) 

 

Kent, Spirit Aero (Aeronautics company, Subang)

 

Loga, IOI Group (Construction Company)

 

Courses we offer and what it is about :

2D /3D / CAD

AutoCAD 2D Essentials – is for beginners (with no experience or very little experience in AutoCAD) – what you will learn – Go from zero to knowing how to create new drawings, or edit existing drawings.

AutoCAD 2D Advanced is for those already familiar with 2D – but want to delve deeper into title blocks, scale, viewports, handling multiple drawings, importing and exporting objects from multiple drawings. title

AutoCAD 3D Essentials- is for those who are already familiar with AutoCAD 2D and want to advance to 3D

Solidworks 3D Essentials- is for beginners starting with Solidworks . This course has all the necessities to get started and model in 3D with Solidworks

Inventor 3D Essentials- is for beginners starting with Inventor . This course has all the necessities to get started and model in 3D with Inventor

3D Studio Max Basics  – is for beginners starting with 3D Studio Max

3D Studio Max Intermediate – is for those already familiar with 3D Studio Max – wanting to go deeper into rendering

Project Management

Microsoft Project Basics – is for those with no experience using Microsoft project, or just starting with Microsoft project.

Microsoft Project Advanced – for those who are already very familiar with Microsoft project and wish to advance further – S Curves, Reporting, Combining with Excel

Effective Project Management Skills with Project Risk Management – is for those involved with projects – Participants will learn about achieving objectives by successful planning, organising resources and effective execution whilst managing the expectations of customers and stakeholders. They will also learn how to manage resources so that there is no wastage of time and money.

Fees  – 2D, 3D, CAD

  1. AutoCAD 2D Essentials    (Normal fees RM 1500, current promo RM 1230 )
  2. AutoCAD 2D Advanced(Normal fees RM 1750, current promo RM 1350 )
  3. AutoCAD 3D Essentials (Normal fees RM 1750, current promo RM 1350 )
  4. Solidworks 3D Essentials (Normal fees RM 1750, current promo RM 1350 )
  5. Inventor 3D Essentials (Normal fees RM 1750, current promo RM 1350 )
  6. 3D PrintingEssentials : (Normal price RM 2150, current promo RM 1490)
  7. 3D Max Basics(Normal fees RM 1500, current promo RM 1230 )
  8. 3D Max Intermediate (Normal fees RM 1750, current promo RM 1350 )

Fees  – Project Management

  1. Microsoft Project   (Normal fees RM 1500, current promo RM 1230 )
  2. Microsoft Project  Advanced  (Normal fees RM 1750, current promo RM 1450 )
  3. Effective Project Management Skills with Project Risk Management(Normal price RM 1350, current promo RM 1150)

Website: http://www.caddesignschool.com/learn-autocad-2d

AutoCAD Puchong, AutoCAD Selangor, AutoCAD 2D Basics, AutoCAD Class, Kelas AutoCAD Seri Kembangan, AutoCAD Putra Heights, AutoCAD Shah Alam, AutoCAD Sunway, AutoCAD PJ, AutoCAD Training, AutoCAD, Kursus AutoCAD Puchong, AutoCAD training Puchong,  AutoCAD classes in Puchong, AutoCAD classes in Sunway, AutoCAD classes Shah Alam, AutoCAD classes Seri Kembangan, AutoCAD classes PJ, AutoCAD Classes Subang, Kursus AutoCAD, Kursus Belajar AutoCAD, belajar AutoCAD di Puchong, Belajar AutoCAD, CIDB , HRDF

 

Training in Asia Pacific University (Apiit)

I was invited recently to Asia Pacific University (Apiit) to do a training for their Engineering students on CAD (Computer Aided Design) AutoCAD and also 3D Printing.  The students were from various years, and from various Engineering fields and also part of their Engineering Club. The students were very bright, attentive and asked many questions, including about 3D Printing.

Here are some pics from the Class..

China 3dprints 10 houses in 24 hours

Company in China prints 10 houses in 24 hours

While we are all coping up with the recent new technology that is 3d Printing, here in Malaysia, our neighbour China has already started experimenting with 3d printed apartment houses. They recently displayed the buildings in the Su Zhou Industrial park, not too far away from Shanghai.

The building stands five-stories and encompasses an area of 1,100 square meters. The best part is the material used for 3d printing is recycled construction waste, coupled with quick forming cement. Not only that the technology brings houses to readiness fast, it is pretty environment friendly too, something that I love about this company.

The company that does this is WinSun Decoration Design Engineering Co, based out of Shanghai. It is the brainchild of Ma Yihe, who has been a pioneer in 3d printing of buildings in China.

From information given in WinSun’s website and the video, it is shown that the printer creates pieces by laying the frame and sides of the hollow walls and after that filling it in with a crisscross design, with material inserted to give fortification. The organization says that design is controlled by a CAD Program. Very similar to how our current 3d printers print small models with plastic right on our desktop, except here it much much bigger, the printer head extrudes wet cement instead of  molten plastic.

Their current modus is to 3d print the big parts in their own factory and then sent them to the site, where it is assembled. So, you don’t really get a massive big printer on site. I suppose it is a matter of time, before the technology get’s to this point, especially when you need to construct larger number of houses.

Looking forward to have a 3d printed houses done right here in Malaysia sometime soon, with our own Malaysian born talent!

regards,

Vyasa,
CAD Design Centre
012-2737190

Receiving the speaker tag, at the recent Makers Week convention

Vyasa, Receiving the speaker tag, at the recent Makers Week convention

Vyasa is the founder of Cad Design Centre, which teaches Young ones and Adults Computer Aided Design  (CAD), 2D, 3D Designs and how it applies to the Engineering, Design and Architectural fields and 3D Printing, in Sri Hartamas, Taman Tun and Puchong.
View more:
-> Hartamas Centre
-> Puchong Centre

www.CadDesignSchool.com 

Anton and Ka Hou, showing of their recently developed models

3d modelling for the young – Anton and Ka Hou

Anton ( 10 years old) and Ka Hou (13 years old) busy working on their 3d Models. Some of the items they modelled include aircraft carriers, battleships, fighter planes and rockets.  After designing, they had their models 3d printed.

Some pictures of them in action here:

Groupie

3D Modelling Class for the family- Abas Family

We had a lot of fun in our recent class, with Mr Abas, and his two young children. We modelled and played with a lot of 3D drawings and models. Some of the items modelled were warships, Key chains and fighter aircrafts. And 3d printed all the items at the end!

 

teamwork

Cad classes for the young – Ka Hou and Ejaz

Ka Hou and Ejaz, both 13 years old, were very keen in modelling. Both had an interest in games, Tinkering, robotics, and modelling. Here they are pictured coming up with Computer Aided Design 2D models. Both came up with unique Bicycle and House models. Great work, guys!

A really funny video about 3D Printing.

3D Printing Funny Video

To see video, click on Image below

A really funny video about 3D Printing.

A really funny video about 3D Printing.

Found this video about 3d printing really funny. Of course, the video is super exaggerated. 3d printers definitely do not print this fast, and they definitely don’t print out items just like this. It could take 5 hours, just to print  an object like a small  toy car.  And there would be a lot of extra prints that need to be cleaned out.

3D printing, this is definitely not, but definitely good for laughs!


To learn 3d printing, Drawing and Modeling for 3d Printing, right here in Malaysia  -> do visit www.CadDesignSchool.com

CAD Design School - Manoo - 3D Mechanical Part, AutoCAD-view 2 (2)

Collection of pictures - in  Makers Week, Mind Valley. Organized by Project Renaissance

Speaking at the Makers Week, Project Renaissance, Mind Valley – part 1 of 4

I was invited to speak at the recent Makers Week in Mind Valley, UOA Bangsar. My topic was 3D Printing in the fields of Education, in Malaysia and other parts of the World. I enjoyed the very interactive audience, the camaraderie and company of my fellow speakers.

Here are some of the pictures taken on the day – Part 1 – Photos by Jimmy Kho, and Project Renaissance

Makers week in KL Oct 11 2014

Makers Week in KL this Oct 11th for a week!

The Maker’s week is finally here, yes!!! I love in all ways, the need to make and create things. Will be speaking in this event too, to highlight the educational uses of 3D Printing, and how it can help Education in Malaysia.

Here is an excerpt from the event website:

The Makers Week 2014

First of its kind—The Makers Week takes place on October 11th to 17th, 2014 in the vibrant city of Kuala Lumpur, Malaysia. The key speaking events will be in Bangsar, UOA Building.  The Makers Week 2014 focuses on 3D Printing to bring together industry experts, hobbyists and enthusiasts to educate and give awareness of 3D printing technology and how it is impacting our everyday lives.

During the week-long event of The Makers Week 2014, each day will specifically focus on an industry that 3D printing technology is profoundly impacting such education, healthcare, engineering, fashion, design, and more. In collaboration with our international and local partners, there will be live talks and showcases of actual 3D objects based on case studies, as well as hands-on workshops to demonstrate how 3D printers work and how to design in 3D.

I’ll be also speaking on Day 2 (Oct 12th, 2pm) – on 3D Printing and Education in Malaysia
Event Details here:
Be there for the event, it is free!  Book your free tickets here-> https://www.eventbrite.com/e/the-makers-week-2014-3d-printing-tickets-13225607147 
Map to Mindvalley (Venue)
Menara Uoa Bangsar
5, Jalan Bangsar Utama 1
Taman Bangsar, Kuala Lumpur




About CAD Design School
We teach Adults to Children as young as 9 years old, on the joys of using Computer Aided Design,and 3D Printing, to create objects they love to create themselves.
Learn more about CAD Design School, and the work we do with young minds- click here -http://www.caddesignschool.com/#!about/c10fk
Manoo, 20 years old from Polytechnic Unku Omar, Ipoh - with his 3D printed mechanical part CAD Design School - Manoo - 3D Mechanical Part, AutoCAD-view 2 (2) Cad Design School 2D Jaslena Ahmad jewellery design 2 Qadira CAD Design School   Devinya, 3D house model Kevin busy tweaking his 3D car model Abran posing with his 3D car model
Buttercup the duck and 3D printing

Buttercup the Duck and 3D printing

I love these kind of stories.. The use of 3D printing shouldn’t be just limited to printing novelty items. Am looking forward to more actual practical uses like this, to be implemented, especially in Malaysia.

“Buttercup is an amazing duck, hatched with a deformed left foot. This new design features a movable ankle with plastic springs for support, tread on the bottom for grip, and a new sock retainer on the back! This entire foot is printed on a 3D printer unlike his 1st prosthetic prototype which was made using a hybrid 3D printing/urethane molding process.”

Seen here, is Buttercup, a duck which had a birth defect and could not walk properly. With the help of a 3D designed and 3D printed leg, Buttercup could start to walk again. Hooray!


About CAD Design School, Malaysia
We teach Adults to Children as young as 9 years old, on the joys of using Computer Aided Design and 3D Printing, to create objects they love to create themselves.
Learn more about CAD Design School, and the work we do with young minds- click here -http://www.caddesignschool.com/#!about/c10fk