Category Archives: Adult Students

Technical Career Choices

The Story: Why this series of Career Guide Articles for Technical studies – part 2

The fact is this whole process would have been much better if I started to get to know about what I want much earlier in life, say 15 onwards. I would have understood the importance of the various subjects that were thought during the ages of 15 onwards, instead of just studying for it. It would make the learning process a lot more fun if you know something about the career path you are wishing to undertake later on in life. Knowing a little about your potential future paths would have given a lot of meaning to the secondary school subjects.

During discussions with many of my fellow engineering students, I gathered that many of them got into the various Engineering fields by virtue of result and not any prior knowledge of the fields. I found this to be pretty interesting.. and what a waste of talent? What if students really knew about the various fields much earlier and get pointed to the right fields much earlier in the lives, and it would save them and their parents much stress and $$$$!

So here is a series of articles with videos I chose carefully from the internet, which I felt explains the field very well and in a simple way. Well, the articles are more technical related fields at this point of time, so be patient :) Currently, it is about the various Engineering fields and Architectural fields,  I will be adding more fields in the near future.

The links to the articles are below. Enjoy the articles and the videos!

Back to part 1 of this article ->http://3dprintingandcadmalaysia.com/career-guide/part-1-Why-this-series-of-technical-career-articles

Regards,
Vyasa, Cad Design Centre

Visit our Career Guide articles below:
Engineering – So What is Engineering?
       Mechanical Engineering
       Mechatronic Engineering
       Electrical Engineering :
       Electronic Engineering
       Cival Engineering :
       Highway Engineering :
       Chemical Engineering :   
       Computer Engineering vs Computer Science :

Architecture:
       What does an Architect do? :
       How to Design like an Architect? :

Cad Design Centre Helps Young ones, Teens and College Students in exploring the above courses early on, before they decide to step in the fields and incur a big College or UCad Design Centre - Apiit Engineering_02niversity fee.  For the already studying Uni Student, the courses will give them an edge in Uni, and at the Workplace

Read more here -> Cad Design School and it’s courses :> List of Courses

 

Technical Career Choices

The Story: Why this series of Career Guide Articles for Technical studies – part 1

I have been asked quite a bit about career choices made as teens get to the age of 16 onwards, and start thinking of their future education.

Very often they start making decisions on courses based on little input they get here and there. Perhaps from a friend or a relative, or a magazine article. Sometimes parents can’t help much, as they are in a totally different profession altogether. For example mom is a banker, father is an accountant, and the son wants to get into the field of engineering, even more specifically electronics engineering. Parents cant do much, as they are not really knowledgable about these technical fields.

I am a Mechanical Engineer, by training but I too got into my field by accident. (I also believe in the Law of Attraction now, but that is a different topic altogether :) I did my STPM a long time ago, and based on my results, it was mentioned by some career guide statistics that with my results, Mechanical Engineering would be the most likely course I would get. Thank god for that, as was i didn’t really want to do medicine (which my parents wanted me to do :)

As I was applying I realised I had a liking for some form of mechanical engineering – as I liked to take a part things, and fix and build stuff when I was growing up. And I had a liking for car engines. So I thought “Hey, Mechanical Engineering would be perfect for me” and applied for the course to a few universities, and got into USM (Their engineering campus was in Tronoh). But throughout the course content, I did not get to even touch or smell a car engine! In reality, studying life was totally different, full of Maths, Maths and more Maths, and lots of physics and lots of theory. Hadn’t I done a proper soul searching of why I went into Mechanical Engineering in the first place, undertaking this course could have been quite a disaster for me.

Continue to part 2 of this article ->http://3dprintingandcadmalaysia.com/career-guide/part-2-Why-this-series-of-technical-career-articles

Regards,
Vyasa, Cad Design Centre

Visit our Career Guide articles below:
Engineering – So What is Engineering?
       Mechanical Engineering
       Mechatronic Engineering
       Electrical Engineering :
       Electronic Engineering
       Cival Engineering :
       Highway Engineering :
       Chemical Engineering :   
       Computer Engineering vs Computer Science :

Architecture:
       What does an Architect do? :
       How to Design like an Architect? :

Cad Design Centre Helps Young ones, Teens and College Students in exploring the above courses early on, before they decide to step in the fields and incur a big College or UCad Design Centre - Apiit Engineering_02niversity fee.  For the already studying Uni Student, the courses will give them an edge in Uni, and at the Workplace

Read more here -> Cad Design School and it’s courses :> List of Courses

 

How Architects Design small

How to Design Like an Architect

Here is a nice video by Doug Patt, explaining not about architecture, but about the design process some architects use. It involves a lot of research, thinking, and sketching to come up with different ideas.

He draws inspiration from Prof Edmund Bacon “Its in the doing that the idea comes”. That is, we must sit and work through something before we can find the best way to solve a problem. Solving a design problem is essentially taking what we know and putting it together with that particular challenge. When an architect sits down to problem solve they frequently sketch.

Enjoy the video!

“Its in the doing that the idea comes”

Regards,
Vyasa, Cad Design Centre

Visit our Career Guide articles below:
Engineering – So What is Engineering?
       Mechanical Engineering
       Mechatronic Engineering
       Electrical Engineering :
       Electronic Engineering
       Cival Engineering :
       Highway Engineering :
       Chemical Engineering :   
       Computer Engineering vs Computer Science :

Architecture:
       What does an Architect do? :
       How to Design like an Architect? :

Cad Design Centre Helps Young ones, Teens and College Students in exploring the above courses early on, before they decide to step in the fields and incur a big College or UCad Design Centre - Apiit Engineering_02niversity fee.  For the already studying Uni Student, the courses will give them an edge in Uni, and at the Workplace

Read more here -> Cad Design School and it’s courses :> List of Courses

 

Career as an architect

What does an architect do?

Video – Architecture as a career – by ThinkTVPBS

An architect is a person who plans, designs, and oversees the construction of buildings. To practice architecture means to provide services in connection with the design and construction of buildings and the space within the site surrounding the buildings, that have as their principal purpose human occupancy or use.

Architects design the spaces in which we live, work, and play. Though not a “classical” STEM (Science, Technology, Engineering and Maths) field, the field of architecture encompasses all aspects of STEM –science, technology, engineering and math, with a nice dose of art and design thrown in. The demand for architects is on the rise, and there has never been a more exciting time to enter the field.

In Malaysia, architects normally work in big architectural firms and some of them eventually end up opening up their own firm. Examples of Malaysia’s well known architects and architectural firms are people like Ng Sek San, Hijjas Kasturi (who designed Menara Telekom, in Pantai) , Kamil Merican of GDP Architects, Ken Yeang and Che Wee Boon .. find out more about them here: http://theculturetrip.com/asia/malaysia/articles/8-malaysian-architects-you-should-know/

Enjoy the video!

“Its in the doing that the idea comes”

Regards,
Vyasa, Cad Design Centre

Visit our Career Guide articles below:
Engineering – So What is Engineering?
       Mechanical Engineering
       Mechatronic Engineering
       Electrical Engineering :
       Electronic Engineering
       Cival Engineering :
       Highway Engineering :
       Chemical Engineering :   
       Computer Engineering vs Computer Science :

Architecture:
       What does an Architect do? :
       How to Design like an Architect? :

Cad Design Centre Helps Young ones, Teens and College Students in exploring the above courses early on, before they decide to step in the fields and incur a big College or UCad Design Centre - Apiit Engineering_02niversity fee.  For the already studying Uni Student, the courses will give them an edge in Uni, and at the Workplace

Read more here -> Cad Design School and it’s courses :> List of Courses

 

Cad Design Centre - up skilling Engineering_25

CAD Training to upskill workforce for the Telco market

Recent training with Ace Training, to up skill graduates from various Universities in Malaysia. Here they get an intensive one month training, on various Telco related subjects and know hows, including learning CAD, before they get absorbed into the job market. This way, they would be able to start performing in their job from day one, without going through extensive trainings by their future employers.

Training in Asia Pacific University (Apiit)

I was invited recently to Asia Pacific University (Apiit) to do a training for their Engineering students on CAD (Computer Aided Design) AutoCAD and also 3D Printing.  The students were from various years, and from various Engineering fields and also part of their Engineering Club. The students were very bright, attentive and asked many questions, including about 3D Printing.

Here are some pics from the Class..

Cad Design Centre opens in Puchong

We are NOW open in Puchong :)

For young ones between 8-15 years old

Classes are during the weekends (currently Saturdays) from 10.30am-1130am
For special Holiday classes – please refer below; or you can contact us directly to find out more.

For college students and working adults:

For College / University students and Working adults who wish to learn CAD to enhance their work skills – click this link -> CAD for Adults and Uni Students.     Frequently asked by adults – can they start  with Zero experience, and if they are much older, can they still start this course? Yes, of course. All of our students start with zero experience, with a proven simple and easy way to understand, and our oldest student is 60+ :)

What We Offer (for young ones)

1. 2D Classes ( 3 months)
2. 3D Classes ( 3 months)
3. 3D Printing ( 3 months)
4. Tinkering ( 3 months)

Children start with 2D and then move on to 3D and 3D printing.  In between we’ll also hold tinkering sessions – where they get a chance to get their hands dirty, by physically building objects such as cardboard houses and wooden objects.

Session Fees:
RM 230/month – Ages 8-12 (4 lessons per month) inclusive of material
RM 330/month – Ages 13-17 (4 lessons per month ) inclusive of material

Holiday Classes:

From 10.30am – 3.00pm, Tues to Fri, (min 4 to start a class)
Prices inclusive of all material. Lunch will be provided,
1 day – RM 330
2 days – RM 600
3 days – RM 780

Location:

CAD Design Centre Sri Puchong
3rd Floor,
No 27, Jalan Puteri 4/6,
Bandar Puteri,
47100 Puchong, Selangor
Google Map : http://bit.ly/CAD_Design_Centre_Puchong_Googlemap
(close to Public Bank Bandar Puteri)

For those who are living in PJ / KL – our Hartamas Centre might be more convenient for you. Click here to find out about our Hartamas Centre.

Contact Us:   012-2737190

Please fill up the form at the right (for desktop browsers) or at the bottom of this page (for mobile users) and we’ll get in touch with you, You can also call us direct at 012-2737190 to find out more.

How Architects Design small

How to Design Like an Architect

Lately i have been working with quite a number of students, who were interested in pursuing a career of architecture in the future.

Here is a nice video by Doug Patt, explaining not about architecture, but about the design process some architects use. It involves a lot of research, thinking, and sketching to come up with different ideas.

He draws inspiration from Prof Edmund Bacon “Its in the doing that the idea comes”. That is, we must sit and work through something before we can find the best way to solve a problem. Solving a design problem is essentially taking what we know and putting it together with that particular challenge. When an architect sits down to problem solve they frequently sketch.

Enjoy the video!

“Its in the doing that the idea comes”

Vyasa,
CAD Design Centre

Receiving the speaker tag, at the recent Makers Week convention

Vyasa, Receiving the speaker tag, at the recent Makers Week convention

Vyasa is the founder of Cad Design Centre, which teaches Young ones and Adults Computer Aided Design  (CAD), 2D, 3D Designs and how it applies to the Engineering, Design and Architectural fields and 3D Printing, in Sri Hartamas, Taman Tun and Puchong.
View more:
-> Hartamas Centre
-> Puchong Centre

 

with some of her layout

Learning AutoCAD and Layout Design to help with current work

Mrs Nesam has always been interested in learning new things, and upgrading herself.

In her office, she has been involved in the layout design of certain parts of her office, and having this responsibility required her to pass designs, read designs and sometimes modifying layout designs to be passed to vendors.

For her, learning AutoCAD gives her an edge in her work, and shortens her time discussing and redoing things with her vendors, as she is able to make changes fast, on her own.

In class, she obviously had a big interest in design, and she got really busy designing her own house.

Hope this AutoCAD class helps her with her work, and wish her the best in her office work!

Vyasa, Cad Design Centre

www.CADDesignSchool.com